L-GEV 200K-TM13-SG
EAN 4047526347109
ID 911310
Customs tariff number 87169090
ID 911310
Customs tariff number 87169090
Pressed steel swivel castor, medium duty design, with top plate fitting, with dead man’s brake, heavy duty wheel, with elastic solid rubber tyre, with cast iron wheel centre, non-marking, grey
Bracket: L series
- pressed steel, zinc-plated, blue-passivated, Cr6-free
- double ball bearing in the swivel head
- strong central kingpin (from wheel Ø 150 mm)
- swivel head seal
- minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
Wheel: GEV series
- tyre: high-quality elastic solid rubber in smooth rolling quality, hardness 65 Shore A, colour grey
- wheel centre: rugged grey cast iron, lacquered, colour silver
- chemical resistance to many aggressive substances, except oils
- operating temperature: -20 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +60 °C
- wheel centre is approximately 4 mm wider than the specified wheel width
- operating angle: max. 38°
- torque required to release the brake: < 10 Nm
- braking force: > 400 N
- Braking can place swivel castors under a significant amount of additional stress, depending on the mass which needs to be braked. We recommend using an additional safety factor of 2.0–3.0 when designing the vehicle / chassis.
L-GEV 200K-TM13-SG
EAN 4047526347109
ID 911310
Customs tariff number 87169090
ID 911310
Customs tariff number 87169090
Pressed steel swivel castor, medium duty design, with top plate fitting, with dead man’s brake, heavy duty wheel, with elastic solid rubber tyre, with cast iron wheel centre, non-marking, grey
Bracket: L series
- pressed steel, zinc-plated, blue-passivated, Cr6-free
- double ball bearing in the swivel head
- strong central kingpin (from wheel Ø 150 mm)
- swivel head seal
- minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
Wheel: GEV series
- tyre: high-quality elastic solid rubber in smooth rolling quality, hardness 65 Shore A, colour grey
- wheel centre: rugged grey cast iron, lacquered, colour silver
- chemical resistance to many aggressive substances, except oils
- operating temperature: -20 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +60 °C
- wheel centre is approximately 4 mm wider than the specified wheel width
- operating angle: max. 38°
- torque required to release the brake: < 10 Nm
- braking force: > 400 N
- Braking can place swivel castors under a significant amount of additional stress, depending on the mass which needs to be braked. We recommend using an additional safety factor of 2.0–3.0 when designing the vehicle / chassis.
Rolling resistance
very good
Operating noise / floor surface preservation
very good
Tread and tyre hardness
65 Shore A
Wear resistance
good
-
Technical Data
-
CAD downloads
Wheel Ø (D) | 200 mm | |
Wheel width | 50 mm | |
Load capacity at 4 km/h | 400 kg | |
Load capacity (static) | 1,000 kg | |
Bearing type | ball bearing | |
Total height (H) | 235 mm | |
Plate size | 140 x 110 mm | |
Bolt hole spacing | 105 x 75–80 mm | |
Bolt hole Ø | 11 mm | |
Width across flats | 13 mm | |
Offset (F) | 65 mm | |
Temperature resistance min | -20 °C | |
Temperature resistance max | 70 °C | |
Tread and tyre hardness | 65 Shore A | |
Unit weight | 6.6 kg | |
Non-marking | ||
Non-staining | ||
Antistatic | ||
Electrically conductive | ||
Corrosion-resistant | ||
Heat-resistant | ||
Tread hydrolysis-resistant | ||
Suitable for autoclaves | ||
Suitable for machine washing |
Please log in for download with your registered email address.