ALBS – Wheel and castor series

Heavy duty wheels and castors with Blickle Besthane® Soft polyurethane tread and aluminium wheel centre

The tread of the ALBS series consists of the high-quality polyurethane-elastomer Blickle Besthane® Soft. This is cast onto a wheel centre made of die-cast aluminium. The extra-thick and elastic tread has a hardness of 75 Shore A. It has a high dynamic load capacity and a particularly low level of rolling resistance. In addition to providing a very high level of operational comfort, the wheel series also offers particularly low noise levels and good floor preservation.

The ALBS series is used for applications requiring excellent operational comfort on uneven surfaces. The series can also be used for high speed applications up to 16 km/h with a reduced load capacity.
The POBS series is used in situation were hydrolysis resistance is an important factor.

  • ALBS – Wheels

    The wheels in the ALBS series come in sizes ranging between 80 and 300 mm in diameter in combination with a ball bearing. The wheels are also available with a crowned tread.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Load capacity
    at 4 km/h
    [kg]
    Load capacity
    at 10 km/h
    [kg]
    Load capacity
    at 16 km/h
    [kg]
    Bearing type


    Axle bore Ø

    [mm]
    Hub
    length
    [mm]
    ALBS 80/15K 80 30 200 ball bearing 15 35
    ALBS 82/15K 80 40 230 ball bearing 15 40
    ALBS 100/15K 100 40 320 ball bearing 15 40
    ALBS 125/15K 125 40 370 ball bearing 15 45
    ALBS 127/20K 125 54 450 220 180 ball bearing 20 60
    ALBS 150/20K 150 50 500 250 200 ball bearing 20 60
    ALBS 160/20K 160 50 580 290 230 ball bearing 20 60
    ALBS 181/20K 180 44 450 220 180 ball bearing 20 44
    ALBS 180/20K 180 50 670 335 240 ball bearing 20 60
    ALBS 200/20K 200 50 750 370 300 ball bearing 20 60
    ALBS 250/20K 250 50 850 400 320 ball bearing 20 60
    ALBS 250/25K 250 50 850 400 320 ball bearing 25 60
    ALBS 300/25K 300 60 1,150 570 460 ball bearing 25 70
  • ALBS – Swivel castors with plate

    As standard, the ALBS wheel series is available with various bracket series with a top plate fitting. These vary in terms of their design and load capacity:

    LK series: Pressed steel swivel bracket with top plate fitting, heavy duty design
    LH series: Pressed steel swivel bracket with top plate fitting, heavy duty design
    LUH series: Pressed steel swivel bracket with top plate fitting, heavy duty enclosed design
    LS series: Heavy duty welded steel swivel bracket with top plate fitting, heavy duty swivel head

    A detailed description and a comparison of the bracket series are available in our guide. The brake systems available for each base product are covered in the relevant section.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Load capacity
    at 4 km/h
    [kg]
    Bearing type


    Total height

    [mm]
    Plate
    dimensions
    [mm]
    Bolt hole
    spacing
    [mm]
    Bolt
    hole Ø
    [mm]
    Offset

    [mm]
    LH-ALBS 82K 80 40 230 ball bearing 120 100 x 85 80 x 60 9 45
    LK-ALBS 82K 80 40 230 ball bearing 110 100 x 85 80 x 60 9 40
    LH-ALBS 100K-1 100 40 320 ball bearing 140 100 x 85 80 x 60 9 45
    LH-ALBS 100K-3 100 40 320 ball bearing 140 140 x 110 105 x 75–80 11 45
    LK-ALBS 100K-1 100 40 320 ball bearing 130 100 x 85 80 x 60 9 45
    LK-ALBS 100K-3 100 40 320 ball bearing 130 140 x 110 105 x 75–80 11 45
    LK-ALBS 125K-1 125 40 350 ball bearing 155 100 x 85 80 x 60 9 48
    LK-ALBS 125K-3 125 40 350 ball bearing 155 140 x 110 105 x 75–80 11 48
    LH-ALBS 125K-1 125 40 370 ball bearing 165 100 x 85 80 x 60 9 45
    LH-ALBS 125K-3 125 40 370 ball bearing 165 140 x 110 105 x 75–80 11 45
    LH-ALBS 127K 125 54 450 ball bearing 170 140 x 110 105 x 75–80 11 55
    LK-ALBS 127K 125 54 450 ball bearing 170 140 x 110 105 x 75–80 11 55
    LS-ALBS 127K 125 54 450 ball bearing 170 140 x 110 105 x 75–80 11 50
    LUH-ALBS 127K 125 54 450 ball bearing 170 140 x 110 105 x 75–80 11 55
    LH-ALBS 150K 150 50 500 ball bearing 197 140 x 110 105 x 75–80 11 65
    LK-ALBS 150K 150 50 500 ball bearing 197 140 x 110 105 x 75–80 11 60
    LS-ALBS 150K 150 50 500 ball bearing 200 140 x 110 105 x 75–80 11 55
    LUH-ALBS 150K 150 50 500 ball bearing 197 140 x 110 105 x 75–80 11 61
    LH-ALBS 160K 160 50 580 ball bearing 202 140 x 110 105 x 75–80 11 65
    LK-ALBS 160K 160 50 580 ball bearing 202 140 x 110 105 x 75–80 11 60
    LS-ALBS 160K 160 50 580 ball bearing 205 140 x 110 105 x 75–80 11 55
    LUH-ALBS 160K 160 50 580 ball bearing 202 140 x 110 105 x 75–80 11 61
    LK-ALBS 180K 180 50 600 ball bearing 223 140 x 110 105 x 75–80 11 65
    LH-ALBS 180K 180 50 670 ball bearing 223 140 x 110 105 x 75–80 11 67
    LK-ALBS 200K 200 50 600 ball bearing 245 140 x 110 105 x 75–80 11 62
    LH-ALBS 200K 200 50 750 ball bearing 245 140 x 110 105 x 75–80 11 70
    LS-ALBS 200K 200 50 750 ball bearing 245 140 x 110 105 x 75–80 11 60
    LUH-ALBS 200K 200 50 750 ball bearing 245 140 x 110 105 x 75–80 11 63
    LH-ALBS 250K 250 50 850 ball bearing 295 140 x 110 105 x 75–80 11 82
    LS-ALBS 250K 250 50 850 ball bearing 305 175 x 140 140 x 105 14 75
    LS-ALBS 300K 300 60 1,150 ball bearing 355 175 x 140 140 x 105 14 85
  • ALBS – Swivel castors with bolt hole

    The ALBS series is available with a bolt hole fitting as an alternative to a plate fitting:

    LKR series: Pressed steel swivel bracket with bolt hole, heavy duty design

    A comparison of the two bracket series is available in the guide. The brake system versions available for each base product are covered in greater detail in the relevant section.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Load capacity
    at 4 km/h
    [kg]
    Bearing type


    Total height

    [mm]
    Plate Ø

    [mm]
    Bolt
    hole Ø
    [mm]
    Offset

    [mm]
    LKR-ALBS 82K 80 40 230 ball bearing 110 88 13 40
    LKR-ALBS 100K 100 40 320 ball bearing 130 88 13 45
    LKR-ALBS 125K 125 40 350 ball bearing 155 88 13 48
  • ALBS – Fixed castors

    Blickle also provides wheels with a suitable fixed bracket for all of the swivel castor series:

    BK series: Pressed steel fixed bracket with top plate fitting, heavy duty design
    BH series: Pressed steel fixed bracket with top plate fitting, heavy duty design 
    BS series: Heavy duty welded steel fixed bracket with top plate fitting

    A detailed description of the fixed castor bracket series is available in our guide.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Load capacity
    at 4 km/h
    [kg]
    Bearing type


    Total height

    [mm]
    Plate
    dimensions
    [mm]
    Bolt hole
    spacing
    [mm]
    Bolt
    hole Ø
    [mm]
    BH-ALBS 82K 80 40 230 ball bearing 120 100 x 85 80 x 60 9
    BK-ALBS 82K 80 40 230 ball bearing 110 100 x 85 80 x 60 9
    BH-ALBS 100K-1 100 40 320 ball bearing 140 100 x 85 80 x 60 9
    BH-ALBS 100K-3 100 40 320 ball bearing 140 140 x 110 105 x 75–80 11
    BK-ALBS 100K-1 100 40 320 ball bearing 130 100 x 85 80 x 60 9
    BK-ALBS 100K-3 100 40 320 ball bearing 130 140 x 110 105 x 75–80 11
    BH-ALBS 125K-1 125 40 370 ball bearing 165 100 x 85 80 x 60 9
    BH-ALBS 125K-3 125 40 370 ball bearing 165 140 x 110 105 x 75–80 11
    BK-ALBS 125K-1 125 40 350 ball bearing 155 100 x 85 80 x 60 9
    BK-ALBS 125K-3 125 40 350 ball bearing 155 140 x 110 105 x 75–80 11
    BH-ALBS 127K 125 54 450 ball bearing 170 140 x 110 105 x 75–80 11
    BS-ALBS 127K 125 54 450 ball bearing 170 140 x 110 105 x 75–80 11
    BH-ALBS 150K 150 50 500 ball bearing 197 140 x 110 105 x 75–80 11
    BS-ALBS 150K 150 50 500 ball bearing 200 140 x 110 105 x 75–80 11
    BH-ALBS 160K 160 50 580 ball bearing 202 140 x 110 105 x 75–80 11
    BS-ALBS 160K 160 50 580 ball bearing 205 140 x 110 105 x 75–80 11
    BH-ALBS 180K 180 50 670 ball bearing 223 140 x 110 105 x 75–80 11
    BH-ALBS 200K 200 50 750 ball bearing 245 140 x 110 105 x 75–80 11
    BS-ALBS 200K 200 50 750 ball bearing 245 140 x 110 105 x 75–80 11
    BH-ALBS 250K 250 50 850 ball bearing 295 140 x 110 105 x 75–80 11
    BS-ALBS 250K 250 50 850 ball bearing 305 175 x 140 140 x 105 14
    BS-ALBS 300K 300 60 1,150 ball bearing 355 175 x 140 140 x 105 14
  • ALBS – Twin castors

    Twin castors are frequently used for high load capacities. The wheels in Blickle’s ALBS series are available in combination with two twin castor bracket types:

    LHD series: Pressed steel twin wheel swivel bracket with top plate fitting, heavy duty design
    BOD series: Heavy duty welded steel fixed bracket with top plate fitting

    The specific features of each bracket series are covered in detail in the guide.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Number of
    wheels

    Load capacity
    at 4 km/h
    [kg]
    Bearing type


    Total height

    [mm]
    Plate
    dimensions
    [mm]
    Bolt hole
    spacing
    [mm]
    Bolt
    hole Ø
    [mm]
    Offset

    [mm]
    LHD-ALBS 80K 80 30 2 360 ball bearing 112 100 x 85 80 x 60 9 45
    BOD-ALBS 80K 80 30 2 400 ball bearing 115 140 x 110 105 x 75–80 11
    BOD-ALBS 100K 100 40 2 640 ball bearing 145 140 x 110 105 x 75–80 11
    LHD-ALBS 100K 100 40 2 640 ball bearing 145 140 x 110 105 x 75–80 11 45
    BOD-ALBS 125K 125 40 2 740 ball bearing 170 140 x 110 105 x 75–80 11
    LHD-ALBS 125K 125 40 2 740 ball bearing 170 140 x 110 105 x 75–80 11 50
    LHD-ALBS 181K 180 44 2 800 ball bearing 235 140 x 110 105 x 75–80 11 65
    BOD-ALBS 181K 180 44 2 800 ball bearing 235 140 x 110 105 x 75–80 11

Our New UK Shop is Now Live!

Explore our brand-new online store for the UK!
Exclusive products, hassle-free shopping, and fast delivery.

Shop now!
×