POSI – Wheel and castor series

Heat-resistant Blickle TempLine® Comfort wheels and castors with silicone rubber tread and synthetic wheel centre

The tread of the POSI series is made from a highly heat-resistant silicone rubber with a hardness of 75 Shore A. This is vulcanised onto a wheel centre made of highly heat-resistant thermoplastic material. The advantages of silicone rubber lie in the good floor preservation and low noise levels during transport. It is also highly elastic, odourless, highly resistant to ageing and corrosion-resistant. The POSI series is provided with a plain bore as standard. The wheels and castors in the POSI series can be used at temperatures between -20 °C bis hin zu +250 °C.

The floor-preserving and corrosion-resistant wheels are mainly used in autoclaves and bakeries due to their resistance to hydrolysis.

  • POSI – Wheels

    The wheels in the POSI series are available in sizes between 100 and 125 mm as standard. The wheel series uses a plain bore. The wheels are also available in a non-marking grey version.A PTFE-coated axle tube is also available.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Load capacity
    at 4 km/h
    [kg]
    Bearing type


    Axle bore Ø

    [mm]
    Hub
    length
    [mm]
    POSI 100/12G 100 40 100 plain bore 12 45
    POSI 101/12G 100 35 80 plain bore 12 38
    POSI 125/12G 125 40 120 plain bore 12 45
  • POSI – Swivel castors with plate

    The wheels in the POSI series are also available as castors with a top plate in combination with the following Blickle bracket series:

    LI series: Heat-resistant pressed steel swivel bracket with top plate fitting, medium duty design
    LIX series: Heat-resistant stainless steel swivel bracket with top plate fitting, medium duty design

    A detailed description of the bracket series is available in our guide. The brake systems available for each base product are listed after you make your selection.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Load capacity
    at 4 km/h
    [kg]
    Bearing type


    Total height

    [mm]
    Plate
    dimensions
    [mm]
    Bolt hole
    spacing
    [mm]
    Bolt
    hole Ø
    [mm]
    Offset

    [mm]
    LI-POSI 100G 100 40 100 plain bore 125 100 x 85 80 x 60 9 36
    LIX-POSI 100G-OF 100 40 100 plain bore 125 100 x 85 80 x 60 9 36
    LI-POSI 125G 125 40 120 plain bore 150 100 x 85 80 x 60 9 38
    LIX-POSI 125G-OF 125 40 120 plain bore 150 100 x 85 80 x 60 9 38
  • POSI – Swivel castors with bolt hole

    In addition to the plate fitting, Blickle also provides the following bracket series with a bolt hole fitting for the POSI series:

    LIR series: Heat-resistant pressed steel swivel bracket with bolt hole, medium duty version
    LIXR series: Heat-resistant stainless steel swivel bracket with bolt hole, medium duty version

    The specific features of the bracket series are covered in our guide. The brake systems available for each base product are listed in the relevant section.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Load capacity
    at 4 km/h
    [kg]
    Bearing type


    Total height

    [mm]
    Plate Ø

    [mm]
    Bolt
    hole Ø
    [mm]
    Offset

    [mm]
    LIR-POSI 100G 100 40 100 plain bore 125 70 13 36
    LIXR-POSI 100G-OF 100 40 100 plain bore 125 70 13 36
    LIR-POSI 125G 125 40 120 plain bore 150 70 13 38
    LIXR-POSI 125G-OF 125 40 120 plain bore 150 70 13 38
  • POSI – Fixed castors

    Blickle also provides heat-resistant fixed castors in the POSI series corresponding to the various swivel castor series: The following bracket series are used for this purpose:

    B series: Heat-resistant pressed steel fixed bracket with top plate fitting, medium duty design
    BX series: Heat-resistant stainless steel fixed bracket with top plate fitting, medium duty design

    A more detailed description of the bracket series and their features is available in our guide.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Load capacity
    at 4 km/h
    [kg]
    Bearing type


    Total height

    [mm]
    Plate
    dimensions
    [mm]
    Bolt hole
    spacing
    [mm]
    Bolt
    hole Ø
    [mm]
    B-POSI 100G 100 40 100 plain bore 125 100 x 85 80 x 60 9
    BX-POSI 100G 100 40 100 plain bore 125 100 x 85 80 x 60 9
    B-POSI 125G 125 40 120 plain bore 150 100 x 85 80 x 60 9
    BX-POSI 125G 125 40 120 plain bore 150 100 x 85 80 x 60 9

Our New UK Shop is Now Live!

Explore our brand-new online store for the UK!
Exclusive products, hassle-free shopping, and fast delivery.

Shop now!
×