Press-on bands - BB series
With Blickle Besthane® polyurethane tread
The BB series consists of a steel-band and a tread of polyurethane-elastomer Blickle Besthane®. The tread has a hardness of 92 Shore A, is highly resistant to cut and tear propagation and provides a very low level of rolling resistance. The press-on bands offer excellent load capacities and a high level of abrasion resistance. They are available in a variety of sizes. The Besthane® tread is hydrolysis-resistant and therefore perfectly suited for wet and humid environments.
The press-on bands are used as replacements in a wide variety of industrial settings, with a particular focus on industrial trucks.
-
BB – Press-on bands
The BB series is cast onto a steel band and is available for wheel sizes ranging between 125 and 645 mm. The strong chemical bond between the tread and the steel-band make the press-on bands suitable for higher speeds up to 16 km/h.
Outer Ø
[mm]Wheel
width
[mm]Internal Ø
[mm]Load capacity
at 4 km/h
[kg]Load capacity
at 10 km/h
[kg]Load capacity
at 16 km/h
[kg]BB 125x40/75 125 40 75 500 BB 125x50/75 125 50 75 660 380 190 BB 150x50/100 150 50 100 780 450 230 BB 150x130/100 150 130 100 1,950 1,100 580 BB 200x50/140 200 50 140 1,000 550 300 BB 200x75/100 200 75 100 1,300 750 390 BB 200x80/120 200 80 120 1,400 800 420 BB 200x130/105 200 130 105 2,250 1,300 670 BB 230x85/170 230 85 170 1,900 1,000 570 BB 250x50/190 250 50 190 1,200 700 360 BB 250x80/170 250 80 170 1,800 1,000 540 BB 250x130/140 250 130 140 2,600 1,500 780 BB 285x75/220 285 75 220 2,000 1,200 600 BB 310x60/220 310 60 220 1,650 1,000 490 BB 310x120/220 310 120 220 3,000 1,750 900 BB 343x115/245 343 115 245 3,600 2,100 1,050 BB 343x140/245 343 140 245 4,200 2,400 1,250 BB 360x60/270 360 60 270 1,900 1,100 570 BB 415x90/305 415 90 305 3,200 1,800 960 BB 645x250/500 645 250 500 12,000 7,000 3,600