Wheel series

Wheels for a wide range of applications

From light duty castors through to wheels for transport units and heavy duty applications, this overview provides information about all of the wheel series available in Blickle’s standard range. Check here for information about the materials used in the tread and wheel centre, how these affect the wheel and the different versions which are available.

  • 01 Wheels for light-duty and transport equipment castors
    ProductSeriesAdvisor.Messages.MobileInformationText
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    TPA
    50–200 mm
    50–250 kg
    high-quality thermoplastic rubber-elastomer (TPE), colour grey
    to material description

    high-quality polypropylene, impact resistant, colour silver grey (“-ELS” version colour black)

    chemically bonded
    85 Shore A
    good
    very good
    satisfactory
    -20 °C to +60 °C
    plain bore, roller bearing, ball bearing (C)
    • electrically conductive, non-marking, grey (-ELS)
    • thread guard with ball bearing seal (-KFD)
    • stainless steel roller bearing (-XR)
    • the load capacity reduces at ambient temperatures above +30 °C
    • wheels with ball bearing (C) with integrated synthetic thread guard as standard
    • oil containing, staining possible
    VPA
    50–150 mm
    40–130 kg
    high-quality solid rubber, colour grey
    to material description
    high-quality nylon 6 or polypropylene in the version “-EL”, impact resistant, colour black
    pressed-on tyre
    80 Shore A
    very good
    good
    suffi cient
    20 °C to +60 °C
    plain bore, ball bearing
    • electrically conductive, black tyre, marking (-EL)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +30 °C
    POES
    80–200 mm
    110–350 kg
    high-quality elastic solid rubber “Blickle SoftMotion”, colour grey
    to material description
    high-quality nylon 6, impact resistant, colour black
    vulcanised tyre
    55 Shore A
    excellent
    very good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    ball bearing (C), ball bearing (CC)
    • thread guard with ball bearing seal (-KAD / -KFD)
    • stainless steel ball bearing and thread guard (-XKA / -XKF)
    • the load capacity reduces at ambient temperatures above +35 °C
    • wheels with ball bearing (C) and ball bearing (CC) with integrated synthetic thread guard as standard
    ALES
    150–250 mm
    280–440 kg
    high-quality elastic solid rubber “Blickle SoftMotion”, colour grey
    to material description
    die-cast aluminium, colour silver grey
    vulcanised tyre
    55 Shore A
    excellent
    very good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    ball bearing
    • the load capacity reduces at ambient temperatures above +60 °C
    PATH
    50–200 mm
    75–500 kg
    high-quality thermoplastic polyurethane (TPU), colour dark grey
    to material description
    high-quality nylon 6, impact resistant, colour silver grey
    chemically bonded
    94 Shore A
    good
    very good
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    plain bore, roller bearing, ball bearing (C)
    • electrically conductive, non-marking, grey (-ELS)
    • thread guard with ball bearing seal (-KAD / -KFD)
    • the load capacity reduces at ambient temperatures above +35 °C
    • wheels with ball bearing (C) with integrated synthetic thread guard as standard
    POA
    35–150 mm
    75–280 kg
    high-quality nylon 6, impact resistant, colour black
    to material description
    high-quality nylon 6, impact resistant, colour black
    70 Shore D
    satisfactory
    excellent
    good
    -20 °C to +80 °C
    plain bore, ball bearing (C)
    • the load capacity reduces at ambient temperatures above +35 °C
    VPP
    80–400 mm
    50–350 kg
    standard solid rubber, colour black
    to material description
    high-quality polypropylene, impact resistant, colour black
    pressed-on tyre
    80 Shore A
    very good
    satisfactory
    sufficient
    -20 °C to +60 °C
    plain bore, roller bearing, ball bearing
    • non-marking, grey tyre (-SG)
    • stainless steel roller bearing (-XR)
    • STARLOCK® cap made from stainless steel (ST-KA...)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +30 °C
    VE
    80–200 mm
    50–205 kg
    standard solid rubber, colour black
    to material description
    pressed steel, zinc-plated, blue-passivated, Cr6-free
    tyre pressed with rim
    80 Shore A
    very good
    satisfactory
    sufficient
    -25 °C to +80 °C
    roller bearing
    • non-marking, grey tyre (-SG)
    • electrically conductive (-EL)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +60 °C
  • 02 Wheels for transport equipment and heavy-duty castors
    ProductSeriesAdvisor.Messages.MobileInformationText
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    V
    80–400 mm
    50–800 kg
    standard solid rubber, colour black
    to material description
    pressed steel, strong rim structure with tubular steel hub, bolted or pressed, zinc-plated, blue-passivated, Cr6-free
    tyre pressed with rim
    80 Shore A
    very good
    satisfactory
    sufficient
    -20 °C to +80 °C
    plain bore, roller bearing, ball bearing
    • non-marking, grey tyre (-SG)
    • electrically conductive (-EL)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +60 °C
    • centrally-pressed rim: special impact and shock-resistant design (-EL)
    • award-winning design (“Die gute Industrieform”)
    VWPP
    125–260 mm
    50–200 kg
    soft rubber “Blickle Soft”, round profile, colour black, wheel Ø 260 mm with additional hard rubber core
    to material description
    high-quality polypropylene, impact resistant, colour black
    pressed-on tyre
    50 Shore A
    excellent
    good
    satisfactory
    -20 °C to +60 °C
    plain bore, roller bearing, ball bearing
    • non-marking, grey tyre (-SG)
    • stainless steel roller bearing (-XR)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +30 °C
    VW
    125–260 mm
    50–200 kg
    soft rubber “Blickle Soft”, round profile, colour black, wheel Ø 260 mm with additional hard rubber core
    to material description
    pressed steel, strong rim structure with tubular steel hub, bolted or pressed, zinc-plated, blue-passivated, Cr6-free
    tyre pressed with rim
    50 Shore A
    excellent
    good
    satisfactory
    -20 °C to +80 °C
    roller bearing, ball bearing
    • non-marking, grey tyre (-SG)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +60 °C
    • centrally-pressed rim: special impact and shock-resistant design
    • award-winning design (“Die gute Industrieform”)
    RD
    100–280 mm
    100–650 kg
    two-component solid rubber “Blickle Comfort”, hard rubber core and highly elastic tread, colour black
    to material description
    pressed steel, strong rim structure with tubular steel hub, bolted or pressed, zinc-plated, blue-passivated, Cr6-free
    tyre pressed with rim
    65 Shore A
    very good
    good
    satisfactory
    -20 °C to +80 °C
    roller bearing, ball bearing
    • non-marking, grey tyre, 56 Shore A (-VLI)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +60 °C
    • centrally-pressed rim: special impact and shock-resistant design
    • award-winning design (“Die gute Industrieform”)
    POEV
    60–300 mm
    120–650 kg
    high-quality elastic solid rubber “Blickle EasyRoll” in smooth rolling quality, colour black
    to material description
    high-quality nylon 6, impact resistant, colour black
    vulcanised tyre
    65 Shore A
    very good
    very good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    plain bore, roller bearing, ball bearing (C), ball bearing (CC), ball bearing
    • non-marking, grey tyre (-SG)
    • non-marking, blue tyre (-SB)
    • electrically conductive (-EL)
    • stainless steel roller bearing (-XR)
    • thread guard with ball bearing seal (-KAD / -KFD)
    • stainless steel ball bearing and thread guard (-XKA / -XKF)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +35 °C
    • electrically conductive version (-EL) with increased rolling resistance
    • wheels with ball bearing (C) and ball bearing (CC) with integrated synthetic thread guard as standard
    ALEV
    100–250 mm
    200–650 kg
    high-quality elastic solid rubber “Blickle EasyRoll” in smooth rolling quality, colour black
    to material description
    die-cast aluminium, colour silver grey
    vulcanised tyre
    65 Shore A
    very good
    very good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    ball bearing
    • non-marking, grey tyre (-SG)
    • antistatic, non-marking, grey tyre (-SG-AS)
    • electrically conductive (-EL)
    • the load capacity reduces at ambient temperatures above +60 °C
    • electrically conductive version (-EL) with increased rolling resistance
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    SE
    80–415 mm
    200–1,150 kg
    high-quality elastic solid rubber “Blickle EasyRoll” in smooth rolling quality, colour black
    to material description
    thick-walled pressed steel, with tubular steel hub, triple welded, lacquered, colour anthracite (version -SG: lacquered, silver colour) wheel Ø 80–125 mm made from high-quality nylon 6, impact resistant, colour black
    vulcanised or steel-wire reinforced tyre, pressed-on
    65 Shore A
    very good
    very good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    ball bearing
    • non-marking, grey tyre (-SG)
    • grease nipple (-NI)
    • the load capacity reduces at ambient temperatures above +60 °C
    • wheel centre particularly resistant to dirt, impact and shocks
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    GEV
    250–620 mm
    870–4,540 kg
    high-quality elastic solid rubber in smooth rolling quality, colour black
    to material description
    rugged grey cast iron, with grease nipple, lacquered, colour anthracite
    steel-wire reinforced tyre, pressed-on
    65 Shore A
    very good
    very good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    ball bearing
    • non-marking, natural colour tyre (-SN)
    • hub cap for use as end wheel (-E)
    • drive wheel with hub keyway (see series GEVN)
    • hub fitting wheel (see series GEVA) (see series GEVA)
    • the load capacity reduces at ambient temperatures above +60 °C
    • wheel centre is approximately 4 mm wider than the specified wheel width
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    DS
    300–500 mm
    1,800–4,580 kg
    high-quality elastic solid rubber in smooth rolling quality, colour black
    to material description
    very strong welded steel construction, with tubular steel hub, with grease nipple, lacquered, colour anthracite
    steel-wire reinforced tyre, pressed-on
    65 Shore A
    very good
    very good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    ball bearing
    • hub cap for use as end wheel (-E)
    • drive wheel with hub keyway (see series DSN)
    • the load capacity reduces at ambient temperatures above +60 °C
    • wheel centre is approximately 4 mm wider than the specified wheel width
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    PK
    200–400 mm
    75–250 kg
    pneumatic tyre, ribbed or zig-zag profile, 2-ply rating, colour black
    to material description
    high-quality polypropylene, impact resistant, colour black
    tyre mounted on rim
    60 Shore A
    excellent
    good
    satisfactory
    -20 °C to +50 °C
    plain bore, roller bearing, ball bearing
    • rim colour red (-ROT)
    • puncture-proof soft rubber wheel (see series VWPP)
    • the load capacity reduces at ambient temperatures above +30 °C
    • wheel width and diameter can change during operation
    P
    180–415 mm
    50–525 kg
    pneumatic tyre, ribbed or zig-zag profile, 2 or 4 ply rating, colour black
    to material description
    pressed steel, bolted (flat base rim) or triple welded drop base rim, zinc-plated, blue-passivated, Cr6-free or lacquered, colour silver
    tyre mounted on rim
    60 Shore A
    excellent
    good
    satisfactory
    -20 °C to +50 °C
    plain bore, roller bearing, ball bearing
    • non-marking, grey tyre (-SG)
    • puncture-proof foam-filled tyre (-AG), slightly reduced compression and operational comfort
    • hub cap for use as end wheel (-E)
    • puncture-proof soft rubber wheel (see series VW)
    • hub fitting wheel (see series PA)
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    • wheel width and diameter can change during operation
    PS
    300–536 mm
    450–1,300 kg
    pneumatic tyre, zig-zag profile, 6, 8 or 10 ply rating, colour black
    to material description
    heavy pressed steel, bolted (flat base rim), with welded tubular steel hub, zinc-plated, blue-passivated, Cr6-free
    tyre mounted on rim
    60 Shore A
    excellent
    good
    satisfactory
    -20 °C to +50 °C
    ball bearing
    • hub cap for use as end wheel (-E)
    • speeds up to a maximum of 25 km/h are permitted with a reduced load capacity
    • wheel width and diameter can change during operation
    VLE
    250–525 mm
    450–1,885 kg
    super-elastic solid rubber, 2-component or 3-component tyres, tough rubber core, highly elastic, abrasion- resistant tread, colour black
    to material description
    heavy pressed steel, bolted, with welded tubular steel hub or reinforced rim version, zinc-plated, blue-passivated, Cr6-free
    steel-wire reinforced tyre, mounted on rim
    70 Shore A
    very good
    good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    ball bearing
    • non-marking, grey tyre (-SG)
    • antistatic, black tyre (-AS)
    • hub cap for use as end wheel (-E)
    • hub fitting wheel (see series VLEA) (see series VLEA)
    • the load capacity reduces at ambient temperatures above +60 °C
    • wheel width and diameter can change during operation
    • speeds up to a maximum of 25 km/h are permitted with a reduced load capacity
    • puncture-proof and maintenance- free
    POTH
    75–250 mm
    200–1,000 kg
    high-quality thermoplastic polyurethane (TPU), colour dark grey
    to material description
    high-quality nylon 6, impact resistant, colour natural white
    chemically bonded
    94 Shore A
    good
    very good
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    plain bore, roller bearing, ball bearing (C), ball bearing
    • stainless steel roller bearing (-XR)
    • stainless steel ball bearing (-XK)
    • stainless steel ball bearing and thread guard (-XKA)
    • thread guard with ball bearing seal (-KAD)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +35 °C
    • wheels with ball bearing (C) with integrated synthetic thread guard as standard
    POTHS
    100–200 mm
    200–550 kg
    high-quality thermoplastic polyurethane (TPU), colour blue
    to material description
    high-quality nylon 6, impact resistant, colour natural white
    chemically bonded
    80 Shore A
    very good
    very good
    good
    -20 °C to +70 °C temporarily up to +90 °C
    plain bore, roller bearing, ball bearing (C), ball bearing
    • stainless steel roller bearing (-XR)
    • stainless steel ball bearing (-XK)
    • stainless steel ball bearing and thread guard (-XKA)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +35 °C
    • wheels with ball bearing (C) with integrated synthetic thread guard as standard
    ALTH
    80–250 mm
    200–1,250 kg
    high-quality polyurethane elastomer Blickle Extrathane®, colour light brown
    to material description
    die-cast aluminium, colour silver grey
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • extremely crowned tread (-CO)
    • antistatic, non-marking, grey (-AS)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    SETH
    125–250 mm
    500–1,350 kg
    high-quality polyurethane elastomer Blickle Extrathane®, colour light brown
    to material description
    thick-walled pressed steel, triple welded, with tubular steel hub, lacquered, colour silver
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • grease nipple (-NI)
    • the load capacity reduces at ambient temperatures above +40 °C
    • wheel centre particularly resistant to dirt, impact and shocks
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    VSTH
    35–125 mm
    100–540 kg
    high-quality polyurethane elastomer Blickle Extrathane®, colour light brown
    to material description
    steel
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • the load capacity reduces at ambient temperatures above +40 °C
    GTH
    100–1,000 mm
    450–30,000 kg
    high-quality polyurethane elastomer Blickle Extrathane®, colour light brown
    to material description
    rugged grey cast iron, with grease nipple from wheel Ø 150 mm, lacquered, colour silver
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing, spherical roller bearing
    • antistatic, non-marking, grey (-AS)
    • drive wheel with hub keyway (see series GTHN)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    ALST
    80–300 mm
    200–1,150 kg
    high-quality polyurethane elastomer Blickle Softhane®, colour green
    to material description
    die-cast aluminium, colour silver grey
    cast tread
    75 Shore A
    very good
    very good
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • antistatic, non-marking, grey (-AS)
    • extremely crowned tread (-CO)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    GST
    125–400 mm
    450–3,000 kg
    high-quality polyurethane elastomer Blickle Softhane®, colour green
    to material description
    rugged grey cast iron, with grease nipple from wheel Ø 160 mm, lacquered, colour silver
    cast tread
    75 Shore A
    very good
    very good
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • antistatic, non-marking, grey (-AS)
    • drive wheel with hub keyway (see series GSTN)
    • hub fitting wheel (see series GSTA)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    ALB
    100–250 mm
    400–1,250 kg
    high-quality polyurethane elastomer Blickle Besthane®, colour brown
    to material description
    die-cast aluminium, colour silver grey
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    VSB
    80 mm
    500 kg
    high-quality polyurethane elastomer Blickle Besthane®, colour brown
    to material description
    steel
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • the load capacity reduces at ambient temperatures above +40 °C
    GB
    100–1,000 mm
    450–30,000 kg
    high-quality polyurethane elastomer Blickle Besthane®, colour brown
    to material description
    rugged grey cast iron, with grease nipple from wheel Ø 150 mm, lacquered, colour silver
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing, spherical roller bearing
    • electrically conductive, non-marking (-ELS)
    • cast nylon wheel centre, hydrolysis resistant, (see series GSPOB)
    • drive wheel with hub keyway (see series GBN)
    • hub fitting wheel (see series GBA)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    POBS
    80–200 mm
    140–500 kg
    high-quality polyurethane elastomer Blickle Besthane® Soft, colour blue
    to material description
    high-quality nylon 6, impact resistant, colour black
    cast tread
    75 Shore A
    very good
    excellent
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing (C), ball bearing (CC)
    • the load capacity reduces at ambient temperatures above +35 °C
    • wheels with ball bearing (C) and ball bearing (CC) with integrated synthetic thread guard as standard
    ALBS
    80–300 mm
    200–1,150 kg
    high-quality polyurethane elastomer Blickle Besthane® Soft, colour blue
    to material description
    die-cast aluminium, colour silver grey
    cast tread
    75 Shore A
    very good
    excellent
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • nylon wheel centre, hydrolysis resistant, (see series POBS)
    • extremely crowned tread (-CO)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    GVU
    100–400 mm
    450–3,000 kg
    high-quality polyurethane elastomer Vulkollan®, colour natural
    to material description
    rugged grey cast iron, with grease nipple from wheel Ø 150 mm, lacquered, colour silver
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • drive wheel with hub keyway (see series GVUN)
    • hub fitting wheel (see series GVUA)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    PPN
    60–200 mm
    80–450 kg
    high-quality polypropylene, impact resistant, colour natural white
    to material description
    high-quality polypropylene, impact resistant, colour natural white
    60 Shore D
    satisfactory
    very good
    satisfactory
    -20 °C to +60 °C
    plain bore, roller bearing
    • stainless steel roller bearing (-XR)
    • electrically conductive (PP-EL series)
    • thread guard (-FA)
    • colour black (see PP series)
    • the load capacity reduces at ambient temperatures above +30 °C
    PP
    60–200 mm
    80–450 kg
    high-quality polypropylene, impact resistant, colour black
    to material description
    high-quality polypropylene, impact resistant, colour black
    60 Shore D
    satisfactory
    very good
    satisfactory
    -20 °C to +60 °C
    plain bore, roller bearing, ball bearing (C), ball bearing
    • electrically conductive, black (-EL)
    • stainless steel roller bearing (-XR)
    • thread guard (-FA)
    • colour natural white (see PPN series)
    • the load capacity reduces at ambient temperatures above +30 °C
    • wheels with ball bearing (C) with integrated synthetic thread guard as standard
    POW
    100–125 mm
    200–220 kg
    high-quality nylon 6, impact resistant, colour white
    to material description
    high-quality nylon 6, impact resistant, colour white highly elastic cushion layer made from elastic solid rubber, colour red
    highly elastic encapsulated cushion layer
    70 Shore D
    satisfactory
    very good
    good
    -20 °C to +80 °C
    ball bearing (C)
    • thread guard with ball bearing seal (-KFD)
    • the load capacity reduces at ambient temperatures above +35 °C
    • good noise absorption, absorbs impact and shocks
    • with integrated synthetic thread guard as standard
    • sandwich wheel
    PO
    50–300 mm
    75–1,500 kg
    high-quality nylon 6, impact resistant, colour natural white
    to material description
    high-quality nylon 6, impact resistant, colour natural white
    70 Shore D
    satisfactory
    excellent
    good
    -20 °C to +80 °C
    plain bore, roller bearing, ball bearing (C), ball bearing
    • electrically conductive, non-marking, grey (-ELS)
    • stainless steel roller bearing (-XR)
    • stainless steel ball bearing (-XK)
    • stainless steel ball bearing and thread guard (-XKA)
    • grease nipple (-NI)
    • colour blue, non-marking (C5017)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +35 °C
    • wheels with ball bearing (C) with integrated synthetic thread guard as standard
    SPO
    75–250 mm
    300–2,000 kg
    high-quality nylon 6, impact resistant, extremely robust heavy-duty version, colour natural white
    to material description
    high-quality nylon 6, impact resistant, colour natural white
    70 Shore D
    satisfactory
    excellent
    good
    -20 °C to +80 °C
    plain bore, ball bearing
    • stainless steel ball bearing (-XK)
    • grease nipple (-NI)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +35 °C
  • 03 Wheels for heavy-duty castors 
    ProductSeriesAdvisor.Messages.MobileInformationText
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    GSPO
    35–1,000 mm
    100–50,000 kg
    high-quality cast nylon, impact resistant, colour natural beige
    material description
    high-quality cast nylon, impact resistant, colour natural beige
    80 Shore D
    satisfactory
    excellent
    very good
    -20 °C to +80 °C
    ball bearing, spherical roller bearing
    • plain bore for static loads or very low speeds
    • stainless steel ball bearing (-XK)
    • spherical roller bearing (-PR) for applications requiring extensive travel
    • the load capacity reduces at ambient temperatures above +35 °C
    G
    80–250 mm
    250–1,400 kg
    rugged grey cast iron, lacquered, colour silver
    material description
    rugged grey cast iron, with grease nipple
    180–220 HB
    sufficient
    excellent
    excellent
    -100 °C to +600 °C
    plain bore, ball bearing
    • heat-resistant ball bearing (oven bearing, -IK)
    • plain bore: provide adequate lubrication on a regular basis
    • the primary purpose of coating is to protect the wheel during transport and storage. Coating remains resistant up to +120 °C
    SVS
    65–300 mm
    750–15,000 kg
    heat-treatable steel, lightly-oiled surface
    to material description
    heat-treatable steel
    190–230 HB
    sufficient
    excellent
    excellent
    -20 °C to +120 °C
    ball bearing
    • spherical roller bearing (-PR) for applications requiring extensive travel
  • 04 Heat-resistant wheels
    ProductSeriesAdvisor.Messages.MobileInformationText
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    VEHI
    100–200 mm
    65–180 kg
    highly heat-resistant solid rubber Blickle TempLine® Basic, colour black
    to material description
    pressed steel, zinc-plated, blue-passivated, Cr6-free
    tyre pressed with rim
    80 Shore A
    very good
    satisfactory
    sufficient
    -25 °C to +200 °C
    roller bearing
    • majority of tyre flattening recovers when in motion under load
    • passivation may be altered slightly in high temperatures, corrosion protection will remain unaffected
    VKHT
    100 mm
    100 kg
    highly heat-resistant solid rubber Blickle TempLine® Special, colour black
    to material description
    highly heat-resistant nylon 6, impact resistant, colour black
    pressed-on tyre
    85 Shore A
    good
    satisfactory
    satisfactory
    -30 °C to +260 °C
    plain bore
    • PTFE coated stainless steel axle tube (-XAT)
    • oven temperature temporarily up to +300 °C, wheel temperature must not exceed +260 °C
    • tyre flattening recovers when in motion under load
    POSI
    100–125 mm
    80–120 kg
    highly heat-resistant silicone rubber Blickle TempLine® Comfort, colour black
    to material description
    highly heat-resistant thermoplastic, impact resistant, colour dark grey
    vulcanised tyre
    75 Shore A
    very good
    good
    satisfactory
    -20 °C to +250 °C
    plain bore
    • non-marking, grey tyre (-SG)
    • PTFE coated stainless steel axle tube (-XAT)
    • oven temperature temporarily up to +300 °C, wheel temperature must not exceed +250 °C
    • suitable for autoclaves
    ALSI
    100 mm
    100 kg
    highly heat-resistant silicone rubber Blickle TempLine® Comfort, colour black
    to material description
    die-cast aluminium, colour silver grey
    vulcanised tyre
    75 Shore A
    very good
    good
    satisfactory
    -25 °C to +250 °C
    plain bore, ball bearing
    • PTFE coated stainless steel axle tube (-XAT)
    • oven temperature temporarily up to +300 °C, wheel temperature must not exceed +250 °C
    • ball bearing with heat-resistant special grease (HK) and ball bearing cover (HKA)
    POH
    80–200 mm
    215–720 kg
    highly heat-resistant nylon Blickle TempLine® PerformanceLight, impact resistant, colour natural
    to material description
    highly heat-resistant Blickle TempLine® PerformanceLight nylon, impact resistant, colour natural
    85 Shore D
    satisfactory
    excellent
    good
    -25 °C to +170 °C
    plain bore, ball bearing
    • PTFE coated stainless steel axle tube (-XAT)
    • stainless steel ball bearing with heat-resistant special grease (-HXK)
    • heavy-duty wheel centre for higher loads (series SPOH)
    • oven temperature temporarily up to +200 °C, wheel temperature must not exceed +170 °C
    • suitable for autoclaves (plain bore version and version with stainless steel ball bearing with heat-resistant special grease (-HXK)
    • long-term use in high temperatures may cause the colour to change, but will not affect load capacity
    POHI
    80–200 mm
    180–600 kg
    highly heat-resistant thermoplastic Blickle TempLine® Performance, impact resistant, colour dark grey
    to material description
    highly heat-resistant thermoplastic, impact resistant, colour dark grey
    85 Shore D
    satisfactory
    excellent
    satisfactory
    -25 °C to +250 °C
    plain bore, ball bearing
    • PTFE coated stainless steel axle tube (-XAT)
    • stainless steel ball bearing with heat-resistant special grease (-HXK)
    • suitable for autoclaves (plain bore version and version with stainless steel ball bearing with heat-resistant special grease (-HXK)
    PHN
    80–200 mm
    100–500 kg
    phenolic resin Blickle TempLine® Classic, impact resistant, colour black
    to material description
    Blickle TempLine® Classic phenolic resin, impact resistant, colour black
    90 Shore D
    satisfactory
    excellent
    sufficient
    -35 °C to +260 °C temporarily up to +300 °C
    plain bore, ball bearing
    • teflon-coated stainless steel axle tube (-XAT)
    • wheels are only conditionally suitable for uneven floors and crossing thresholds
  • 05 Guide rollers
    ProductSeriesAdvisor.Messages.MobileInformationText
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    FPU
    25–60 mm
    15–100 kg
    high-quality thermoplastic polyurethane (TPU), colour brown
    to material description
    tread directly injected onto the ball bearing
    98 Shore A
    good
    very good
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • electrically conductive, non-marking (-ELS)
    • stainless steel ball bearing (-XK)
    • the load capacity reduces at ambient temperatures above +35 °C
    FPTH
    60–125 mm
    110–290 kg
    high-quality thermoplastic polyurethane (TPU), colour dark grey
    to material description
    high-quality nylon 6, impact resistant, colour silver grey
    chemically bonded
    92 Shore A
    good
    very good
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • electrically conductive, non-marking (-ELS)
    • stainless steel ball bearing (-XK)
    • the load capacity reduces at ambient temperatures above +35 °C
    • hydrolysis resistant
    FTH
    30–75 mm
    25–150 kg
    high-quality polyurethane elastomer Blickle Extrathane®, colour light brown
    to material description
    tread directly casted onto the ball bearing
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • stainless steel ball bearing (-XK)
    • the load capacity reduces at ambient temperatures above +40 °C
    FSTH
    40–125 mm
    60–375 kg
    high-quality polyurethane elastomer Blickle Extrathane®, colour light brown
    to material description
    steel
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • antistatic, non-marking, grey (-AS)
    • with aluminium wheel centre (series FALTH)
    • the load capacity reduces at ambient temperatures above +40 °C
    FPOB
    80–125 mm
    160–375 kg
    high-quality polyurethane elastomer Blickle Besthane®, colour brown
    to material description
    high-quality nylon 6, impact resistant, colour black
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -20 °C to +70 °C
    ball bearing
    • stainless steel ball bearing (-XK)
    • the load capacity reduces at ambient temperatures above +35 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    • hydrolysis resistant
    FSVU
    40–100 mm
    70–250 kg
    high-quality polyurethane elastomer Vulkollan®, colour natural
    to material description
    steel
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • stainless steel ball bearing (-XK)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    FPO
    25–125 mm
    40–530 kg
    high-quality nylon 6, impact resistant, colour natural white
    to material description
    tread directly injected onto the ball bearing
    70 Shore D
    satisfactory
    excellent
    good
    -20 °C to +80 °C
    ball bearing
    • electrically conductive, non-marking, grey (-ELS)
    • stainless steel ball bearing (-XK)
    • the load capacity reduces at ambient temperatures above +35 °C
  • 06 Flanged wheels 
    ProductSeriesAdvisor.Messages.MobileInformationText
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    SPKGSPO
    50–250 mm
    220–3,000 kg
    high-quality cast nylon, impact resistant, colour natural beige
    to material description
    high-quality cast nylon, impact resistant, colour natural beige
    80 Shore D
    satisfactory
    excellent
    very good
    -20 °C to +80 °C
    plain bore, ball bearing
    • stainless steel ball bearing (-XK)
    • drive wheel with hub keyway (see series SPKGSPON)
    • the load capacity reduces at ambient temperatures above +35 °C
    • load capacities apply for rail profi les A 45, A 55 (DIN 536)
    SPK
    50–250 mm
    400–3,500 kg
    rugged grey cast iron, colour silver
    to material description
    rugged grey cast iron, with grease nipple from wheel Ø 125 mm
    180–220 HB
    sufficient
    excellent
    excellent
    -100 °C to +600 °C
    plain bore, ball bearing
    • heat-resistant ball bearing (oven bearing, -IK)
    • plain bore: provide adequate lubrication on a regular basis
    • load capacities apply for rail profi les A 45, A 55 (DIN 536)
    • the primary purpose of coating is to protect the wheel during transport and storage. Coating remains resistant up to +120 °C
    SPKVS
    50–400 mm
    500–9,000 kg
    heat-treatable steel, lightly-oiled surface
    to material description
    heat-treatable steel
    190–230 HB
    sufficient
    excellent
    excellent
    -20 °C to +120 °C
    ball bearing
    • heat-resistant ball bearing (oven bearing, -IK)
    • spherical roller bearing (-PR) for applications requiring extensive travel
    • drive wheel with hub keyway (see series SPKVSN)
    • load capacities apply for rail profi les A 45, A 55 and A 65 (DIN 536)
    DSPKGSPO
    50–200 mm
    50–700 kg
    high-quality cast nylon, impact resistant, colour natural beige
    to material description
    high-quality cast nylon, impact resistant, colour natural beige
    80 Shore D
    satisfactory
    excellent
    very good
    -20 °C to +80 °C
    plain bore, ball bearing
    • stainless steel ball bearing (-XK)
    • the load capacity reduces at ambient temperatures above +35 °C
    DSPK
    50–200 mm
    120–1,200 kg
    heat-treatable steel, lightly-oiled surface
    to material description
    heat-treatable steel
    190–230 HB
    sufficient
    excellent
    excellent
    -20 °C to +120 °C
    ball bearing
  • 07 Drive wheels
    ProductSeriesAdvisor.Messages.MobileInformationText
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    GEVN
    160–620 mm
    300–4,540 kg
    high-quality elastic solid rubber in drive-quality, with steel-band, colour black, wheel Ø 400+500 mm: Smooth rolling quality, steel-wire reinforced
    to material description
    rugged grey cast iron, axle bore and hub keyway in accordance with DIN 6885, lacquered, colour anthracite
    steel-wired reinforced or pressed-on steel-band tyre
    65 Shore A
    very good
    good
    satisfactory
    -30 °C to +80 °C temporarily up to +100 °C
    hub keyway
    • pressed-on steel band in friction wheel quality (-STR)
    • the load capacity reduces at ambient temperatures above +60 °C
    • wheel centre is approximately 4 mm wider than the specified wheel width
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    GTHN
    75–1,000 mm
    300–25,000 kg
    high-quality polyurethane elastomer Blickle Extrathane®, colour light brown
    to material description
    rugged grey cast iron, axle bore and hub keyway in accordance with DIN 6885, lacquered, colour silver
    cast tread
    92 Shore A
    good
    very good
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    hub keyway
    • antistatic, non-marking, grey (-AS)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    GSTN
    75–500 mm
    200–4,200 kg
    high-quality polyurethane elastomer Blickle Softhane®, colour green
    to material description
    rugged grey cast iron, axle bore and hub keyway in accordance with DIN 6885, lacquered, colour silver
    cast tread
    75 Shore A
    very good
    very good
    very good
    -30 °C to +70 °C temporarily up to +90 °C
    hub keyway
    • antistatic, non-marking, grey (-AS)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    GBN
    100–1,000 mm
    400–25,000 kg
    high-quality polyurethane elastomer Blickle Besthane®, colour brown
    to material description
    rugged grey cast iron, axle bore and hub keyway in accordance with DIN 6885, lacquered, colour silver
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    hub keyway
    • electrically conductive, non-marking (-ELS)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    GVUN
    100–400 mm
    400–3,400 kg
    high-quality polyurethane elastomer Vulkollan®, colour natural
    to material description
    rugged grey cast iron, axle bore and hub keyway in accordance with DIN 6885, lacquered, colour silver
    cast tread
    92 Shore A
    good
    very good
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    hub keyway
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    SPKVSN
    200–300 mm
    2,500–7,000 kg
    heat-treatable steel, lightly-oiled surface
    to material description
    heat-treatable steel, axle bore and hub keyway in accordance with DIN 6885
    190–230 HB
    sufficient
    excellent
    excellent
    -100 °C to +600 °C
    hub keyway
    • load capacities apply for rail profiles A 45, A 55 and A 65 (DIN 536)
    • load capacity reduced by 50% at + 300 °C
  • 08 Hub fitting wheels
    ProductSeriesAdvisor.Messages.MobileInformationText
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    PA
    400–536 mm
    250–1,300 kg
    pneumatic tyre, ribbed or zig-zag profile, 2 to 10 ply rating, colour black
    to material description
    pressed steel, with central hole, fixing holes are counter-sunk for installation on standard hub fl anges, zinc-plated, blue-passivated, Cr6-free or lacquered, silver colour
    tyre mounted on rim
    60 Shore A
    excellent
    good
    satisfactory
    -30 °C to +50 °C
    hub fitting
    • speeds up to a maximum of 25 km/h are permitted with a reduced load capacity
    • wheel width and diameter can change during operation
    VLEA
    405–525 mm
    950–1,885 kg
    super-elastic solid rubber, 3-component tyre, highly-elastic cushion layer, abrasion-resistant tread, colour black
    to material description
    heavy pressed steel, bolted (flat base rim), with central hole, fixing holes are counter-sunk for installation on standard hub flanges, zinc-plated, blue-passivated, Cr6-free
    steel-wire reinforced tyre, mounted on rim
    70 Shore A
    very good
    good
    good
    -30 °C to +80 °C temporarily up to +100 °C
    hub fitting
    • non-marking, grey tyre (-SG)
    • antistatic, black tyre (-AS)
    • drive wheel with hub keyway (see series VLEN)
    • the load capacity reduces at ambient temperatures above +60 °C
    • speeds up to a maximum of 25 km/h are permitted with a reduced load capacity
    • wheel width and diameter can change during operation
    • puncture-proof and maintenance- free
    GEVA
    250–620 mm
    630–4,540 kg
    high-quality elastic solid rubber in smooth rolling quality, colour black
    to material description
    rugged grey cast iron, with central hole, fixing holes are counter-sunk for installation on standard hub flanges, lacquered, colour anthracite
    steel-wire reinforced tyre, pressed-on
    65 Shore A
    very good
    very good
    satisfactory
    -30 °C to +80 °C temporarily up to +100 °C
    hub fitting
    • pressed-on steel band in drive quality (-STA)
    • the load capacity reduces at ambient temperatures above +60 °C
    • wheel centre is approximately 4 mm wider than the specified wheel width
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    GSTA
    200–400 mm
    700–2,500 kg
    high-quality polyurethane elastomer Blickle Softhane®, colour green
    to material description
    rugged grey cast iron, with central hole, fixing holes are counter-sunk for installation on standard hub flanges, lacquered, colour silver
    cast tread
    75 Shore A
    very good
    very good
    very good
    -30 °C to +70 °C temporarily up to +90 °C
    hub fitting
    • antistatic, non-marking, grey (-AS)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    GBA
    200–400 mm
    900–3,400 kg
    high-quality polyurethane elastomer Blickle Besthane®, colour brown
    to material description
    rugged grey cast iron, with central hole, fixing holes are counter-sunk for installation on standard hub flanges, lacquered, colour silver
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    hub fitting
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    VSVU
    125–300 mm
    700–2,400 kg
    high-quality polyurethane elastomer Vulkollan®, colour natural
    to material description
    heat-treatable steel
    cast tread
    92 Shore A
    good
    very good
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    axle bore
    • individual turning
    • wheel with clamping set
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
  • 09 Rollers for pallet trucks
    ProductSeriesAdvisor.Messages.MobileInformationText
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    HTH
    60–90 mm
    220–1,130 kg
    high-quality polyurethane elastomer Blickle Extrathane®, colour light brown
    to material description
    metal
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • with Blickle Softhane® polyurethane tread (see series HST)
    • splash and washproof version (see series HTHW)
    • wheel centre without ball bearing (ball bearing seat)
    • the load capacity reduces at ambient temperatures above +40 °C
    HB
    80–85 mm
    550–960 kg
    high-quality polyurethane elastomer Blickle Besthane®, colour brown
    to material description
    metal
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • nylon wheel centre, hydrolysis resistant, (see series HPOB)
    • splash and washproof version (see series HBW)
    • wheel centre without ball bearing (ball bearing seat)
    • the load capacity reduces at ambient temperatures above +40 °C
    HTHW
    82–85 mm
    550–1,060 kg
    high-quality polyurethane elastomer Blickle Extrathane®, colour light brown
    to material description
    metal
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • with Blickle Besthane® polyurethane tread (see series HBW)
    • with Blickle Softhane® polyurethane tread (see series HSTW)
    • the load capacity reduces at ambient temperatures above +40 °C
    • nylon socket for splash and washproof ball bearing
    HPO
    80–85 mm
    420–1,100 kg
    high-quality nylon 6, impact resistant, colour natural white
    to material description
    high-quality nylon 6, impact resistant, colour natural white
    70 Shore D
    satisfactory
    excellent
    good
    -20 °C to +80 °C
    ball bearing
    • stainless steel ball bearing (-XK)
    • made from cast nylon, for applications requiring high load capacity (see HGSPO series)
    • the load capacity reduces at ambient temperatures above +35 °C
  • 10 Forklift truck wheels
    ProductSeriesAdvisor.Messages.MobileInformationText
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    REV
    215–254 mm
    high-quality elastic solid rubber in drive-quality, colour black REV 215x82/60-5-SG: grey, non-marking
    to material description
    rugged grey cast iron or ductile cast iron
    vulcanised or steel-wire reinforced tyre, pressed-on
    70 Shore A
    very good
    very good
    satisfactory
    -30 °C to +80 °C temporarily up to +100 °C
    • the load capacity reduces at ambient temperatures above +60 °C
    • drive wheels are suitable for the manufacturer number specified in the product range 
    RTH
    200–270 mm
    high-quality polyurethane elastomer Blickle Extrathane®, colour light brown
    to material description
    rugged grey cast iron or ductile cast iron
    cast tread
    92 Shore A
    good
    very good
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    • the load capacity reduces at ambient temperatures above +40 °C
    • drive wheels are suitable for the manufacturer number specified in the product range 
    RB
    230–343 mm
    high-quality polyurethane elastomer Blickle Besthane®, colour brown
    to material description
    rugged grey cast iron or ductile cast iron
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    • the load capacity reduces at ambient temperatures above +40 °C
    • drive wheels are suitable for the manufacturer number specified in the product range 
    RVU
    230–250 mm
    high-quality polyurethane elastomer Vulkollan®, colour natural
    to material description
    rugged grey cast iron or ductile cast iron
    cast tread
    92 Shore A
    good
    very good
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    • the load capacity reduces at ambient temperatures above +40 °C
    • drive wheels are suitable for the manufacturer number specified in the product range 
  • 11 Tyres
    ProductSeriesAdvisor.Messages.MobileInformationText
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    BSEV
    250–525 mm
    480–2,260 kg
    super-elastic solid rubber, 2-component or 3-component tyres, tough rubber core, highly elastic, abrasion-resistant tread, colour black
    to material description
    steel-wire reinforced
    70 Shore A
    very good
    good
    good
    -30 °C to +80 °C temporarily up to +100 °C
    • non-marking, grey tyre (-SG)
    • the load capacity reduces at ambient temperatures above +60 °C
    • tyre is suitable for the standard rims specified in the table in the product range 
    • speeds up to a maximum of 25 km/h are permitted with a reduced load capacity
  • 12 Press-on bands
    ProductSeriesAdvisor.Messages.MobileInformationText
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    BEV...-ZDG
    125–610 mm
    190–2,700 kg
    high-quality elastic solid rubber in smooth rolling quality, colour black
    to material description
    steel-wire reinforced
    65 Shore A
    very good
    very good
    good
    -30 °C to +80 °C temporarily up to +100 °C
    • non-marking, natural colour tyre (-SN)
    • the load capacity reduces at ambient temperatures above +60 °C
    • suitable for wheel centre with outer diameter tolerance h11
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    BEV...-ZST
    150–620 mm
    300–5,580 kg
    high-quality elastic solid rubber in drive-quality, colour black
    to material description
    steel-band
    vulcanised tread
    65 Shore A
    very good
    very good
    good
    -30 °C to +80 °C temporarily up to +100 °C
    • non-marking, natural colour tyre (-SN)
    • the load capacity reduces at ambient temperatures above +60 °C
    • suitable for wheel centre with outer diameter tolerance h11
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    BTH
    125–610 mm
    500–7,200 kg
    high-quality polyurethane elastomer Blickle Extrathane®, colour light brown
    to material description
    steel-band
    cast tread
    92 Shore A
    good
    very good
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    • the load capacity reduces at ambient temperatures above +40 °C
    • suitable for wheel centre with outer diameter tolerance h11
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    BB
    125–645 mm
    500–12,000 kg
    high-quality polyurethane elastomer Blickle Besthane®, colour brown
    to material description
    steel-band
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    • the load capacity reduces at ambient temperatures above +40 °C
    • suitable for wheel centre with outer diameter tolerance h11
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
  • 13 Heat-resistant Progressus wheels for castors
    ProductSeriesAdvisor.Messages.MobileInformationText
    Series
    Wheel-Ø
    Load capacity
    Tread / Tyre
    Wheel centre / rim
    Connection tread / tyre with wheel centre / rim
    Tread and tyre hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    PGV
    84–186 mm
    90–200 kg
    high-quality elastic solid rubber in smooth rolling quality, colour grey, non-marking
    to material description
    die-cast aluminium, colour silver grey
    tyre mounted on rim
    80 Shore A
    very good
    very good
    satisfactory
    -20 °C to +134 °C
    roller bearing, ball bearing
    • electrically conductive (-EL)
    • suitable for autoclaves
    • tyre flattening recovers when in motion under load
    ALTPU
    120–150 mm
    120–150 kg
    high-quality thermoplastic polyurethane (TPU), colour dark grey, non-marking, electrically conductive
    to material description
    die-cast aluminium, colour silver grey
    chemically bonded
    92 Shore A
    good
    very good
    very good
    -20 °C to +134 °C
    ball bearing
    • suitable for autoclaves
    • majority of tyre flattening recovers when in motion under load