PATH – Wheel and castor series

Wheels and castors with thermoplastic polyurethane tread and nylon wheel centre

Wheels and castors in the PATH series consist of a high-quality thermoplastic polyurethane tread (TPU) and an impact-resistant nylon wheel centre. The tread has a hardness of 94 Shore A and is cast onto the wheel centre. It is non-marking and non-staining. The tread has a very low level of rolling and swivel resistance, while also being highly abrasion-resistant.

The PATH series is frequently used for hygiene applications. The electrically conductive version is frequently used for medical devices to protect them against electric discharge.
The POTH series is preferred for higher load capacities.

  • PATH – Wheels

    The wheels in the PATH series come in sizes ranging between 50 and 200 mm in diameter as standard. They are also available with a ball bearing, roller bearing or plain bore. Electrically conductive versions are also available, in addition to versions with a thread guard and sealed ball bearing.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Load capacity
    at 4 km/h
    [kg]
    Bearing type


    Axle bore Ø

    [mm]
    Hub
    length
    [mm]
    PATH 80/12G 80 32 150 plain bore 12 35
    PATH 80/8KF 80 32 150 ball bearing (C) 8 36
    PATH 100/12G 100 32 200 plain bore 12 45
    PATH 100/10KF 100 32 200 ball bearing (C) 10 46
    PATH 100/8KF 100 32 200 ball bearing (C) 8 46
    PATH 125/12G 125 32 250 plain bore 12 45
    PATH 125/10KF 125 32 250 ball bearing (C) 10 46
    PATH 125/8KF 125 32 250 ball bearing (C) 8 46
    PATH 160/20G 160 40 400 plain bore 20 60
    PATH 160/20R 160 40 400 roller bearing 20 60
    PATH 160/12KA 160 40 400 ball bearing (C) 12 62
    PATH 160/20KA 160 40 400 ball bearing (C) 20 60
    PATH 200/20G 200 40 500 plain bore 20 60
    PATH 200/20R 200 40 500 roller bearing 20 60
    PATH 200/12KA 200 40 500 ball bearing (C) 12 62
    PATH 200/20KA 200 40 500 ball bearing (C) 20 60
  • PATH – Swivel castors with plate

    The PATH wheel series is available as standard with a variety of bracket series with a top plate fitting for a wide range of applications. These range from standard pressed steel swivel castors through to heavy duty pressed steel swivel castors.

    LE series: Pressed steel swivel bracket with top plate fitting
    L series: Pressed steel swivel bracket with top plate fitting, medium duty design
    LK series: Pressed steel swivel bracket with top plate fitting, heavy duty design

    A detailed description and a comparison of the bracket series are available in our guide. The brake systems available for each base product are covered in the relevant section.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Load capacity
    at 4 km/h
    [kg]
    Bearing type


    Total height

    [mm]
    Plate
    dimensions
    [mm]
    Bolt hole
    spacing
    [mm]
    Bolt
    hole Ø
    [mm]
    Offset

    [mm]
    LE-PATH 80G 80 32 150 plain bore 102 100 x 85 80 x 60 9 38
    LK-PATH 80G 80 32 150 plain bore 110 100 x 85 80 x 60 9 40
    L-PATH 80G 80 32 150 plain bore 102 100 x 85 80 x 60 9 38
    LE-PATH 80KF 80 32 150 ball bearing (C) 102 100 x 85 80 x 60 9 38
    LK-PATH 80KF 80 32 150 ball bearing (C) 110 100 x 85 80 x 60 9 40
    L-PATH 80KF 80 32 150 ball bearing (C) 102 100 x 85 80 x 60 9 38
    LE-PATH 100G 100 32 150 plain bore 125 100 x 85 80 x 60 9 36
    L-PATH 100G 100 32 200 plain bore 125 100 x 85 80 x 60 9 36
    LE-PATH 100KF 100 32 150 ball bearing (C) 125 100 x 85 80 x 60 9 36
    LK-PATH 100KF-1 100 32 200 ball bearing (C) 130 100 x 85 80 x 60 9 45
    LK-PATH 100KF-3 100 32 200 ball bearing (C) 130 140 x 110 105 x 75–80 11 45
    L-PATH 100KF 100 32 200 ball bearing (C) 125 100 x 85 80 x 60 9 36
    LE-PATH 125G 125 32 150 plain bore 150 100 x 85 80 x 60 9 38
    L-PATH 125G 125 32 250 plain bore 150 100 x 85 80 x 60 9 38
    LE-PATH 125KF 125 32 150 ball bearing (C) 150 100 x 85 80 x 60 9 38
    LK-PATH 125KF-1 125 32 250 ball bearing (C) 155 100 x 85 80 x 60 9 48
    LK-PATH 125KF-3 125 32 250 ball bearing (C) 155 140 x 110 105 x 75–80 11 48
    L-PATH 125KF 125 32 250 ball bearing (C) 150 100 x 85 80 x 60 9 38
    LE-PATH 160G 160 40 300 plain bore 195 140 x 110 105 x 75–80 11 54
    LK-PATH 160G 160 40 400 plain bore 202 140 x 110 105 x 75–80 11 60
    L-PATH 160G 160 40 400 plain bore 195 140 x 110 105 x 75–80 11 60
    LE-PATH 160R 160 40 300 roller bearing 195 140 x 110 105 x 75–80 11 54
    LK-PATH 160R 160 40 400 roller bearing 202 140 x 110 105 x 75–80 11 60
    L-PATH 160R 160 40 400 roller bearing 195 140 x 110 105 x 75–80 11 60
    LE-PATH 160KA 160 40 300 ball bearing (C) 195 140 x 110 105 x 75–80 11 54
    LK-PATH 160KA 160 40 400 ball bearing (C) 202 140 x 110 105 x 75–80 11 60
    L-PATH 160KA 160 40 400 ball bearing (C) 195 140 x 110 105 x 75–80 11 60
    LE-PATH 200G 200 40 300 plain bore 235 140 x 110 105 x 75–80 11 54
    L-PATH 200G 200 40 400 plain bore 235 140 x 110 105 x 75–80 11 65
    LK-PATH 200G 200 40 500 plain bore 245 140 x 110 105 x 75–80 11 62
    LE-PATH 200R 200 40 300 roller bearing 235 140 x 110 105 x 75–80 11 54
    L-PATH 200R 200 40 400 roller bearing 235 140 x 110 105 x 75–80 11 65
    LK-PATH 200R 200 40 500 roller bearing 245 140 x 110 105 x 75–80 11 62
    LE-PATH 200KA 200 40 300 ball bearing (C) 235 140 x 110 105 x 75–80 11 54
    L-PATH 200KA 200 40 400 ball bearing (C) 235 140 x 110 105 x 75–80 11 65
    LK-PATH 200KA 200 40 500 ball bearing (C) 245 140 x 110 105 x 75–80 11 62
  • PATH – Swivel castors with bolt hole

    As an alternative to the plate fitting, the Blickle range also contains a bracket series with a bolt hole for the PATH series:

    LER series: Pressed steel swivel bracket with bolt hole

    A detailed description of the LER bracket is available in our guide. Suitable brake systems for each base product are covered in the relevant section.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Load capacity
    at 4 km/h
    [kg]
    Bearing type


    Total height

    [mm]
    Plate Ø

    [mm]
    Bolt
    hole Ø
    [mm]
    Offset

    [mm]
    LER-PATH 80G 80 32 150 plain bore 102 70 13 38
    LER-PATH 80KF 80 32 150 ball bearing (C) 102 70 13 38
    LER-PATH 100G 100 32 150 plain bore 125 70 13 36
    LER-PATH 100KF 100 32 150 ball bearing (C) 125 70 13 36
    LER-PATH 125G 125 32 150 plain bore 150 70 13 38
    LER-PATH 125KF 125 32 150 ball bearing (C) 150 70 13 38
    LER-PATH 160G 160 40 300 plain bore 195 88 13 54
    LER-PATH 160R 160 40 300 roller bearing 195 88 13 54
    LER-PATH 160KA 160 40 300 ball bearing (C) 195 88 13 54
    LER-PATH 200G 200 40 300 plain bore 235 88 13 54
    LER-PATH 200R 200 40 300 roller bearing 235 88 13 54
    LER-PATH 200KA 200 40 300 ball bearing (C) 235 88 13 54
  • PATH – Fixed castors

    The PATH wheel series can be combined with a wide range of fixed bracket series:

    B series: Pressed steel fixed bracket with top plate fitting, medium duty design
    BK series: Pressed steel fixed bracket with top plate fitting, heavy duty design
    BH series: Pressed steel fixed bracket with top plate fitting, heavy duty design

    A comparison of these fixed bracket series is available in the guide.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Load capacity
    at 4 km/h
    [kg]
    Bearing type


    Total height

    [mm]
    Plate
    dimensions
    [mm]
    Bolt hole
    spacing
    [mm]
    Bolt
    hole Ø
    [mm]
    BK-PATH 80G 80 32 150 plain bore 110 100 x 85 80 x 60 9
    B-PATH 80G 80 32 150 plain bore 102 100 x 85 80 x 60 9
    BK-PATH 80KF 80 32 150 ball bearing (C) 110 100 x 85 80 x 60 9
    B-PATH 80KF 80 32 150 ball bearing (C) 102 100 x 85 80 x 60 9
    B-PATH 100G 100 32 200 plain bore 125 100 x 85 80 x 60 9
    BK-PATH 100KF-1 100 32 200 ball bearing (C) 130 100 x 85 80 x 60 9
    BK-PATH 100KF-3 100 32 200 ball bearing (C) 130 140 x 110 105 x 75–80 11
    B-PATH 100KF 100 32 200 ball bearing (C) 125 100 x 85 80 x 60 9
    B-PATH 125G 125 32 250 plain bore 150 100 x 85 80 x 60 9
    BK-PATH 125KF-1 125 32 250 ball bearing (C) 155 100 x 85 80 x 60 9
    BK-PATH 125KF-3 125 32 250 ball bearing (C) 155 140 x 110 105 x 75–80 11
    B-PATH 125KF 125 32 250 ball bearing (C) 150 100 x 85 80 x 60 9
    BH-PATH 160G 160 40 400 plain bore 202 140 x 110 105 x 75–80 11
    B-PATH 160G 160 40 400 plain bore 195 140 x 110 105 x 75–80 11
    BH-PATH 160R 160 40 400 roller bearing 202 140 x 110 105 x 75–80 11
    B-PATH 160R 160 40 400 roller bearing 195 140 x 110 105 x 75–80 11
    BH-PATH 160KA 160 40 400 ball bearing (C) 202 140 x 110 105 x 75–80 11
    B-PATH 160KA 160 40 400 ball bearing (C) 195 140 x 110 105 x 75–80 11
    B-PATH 200G 200 40 400 plain bore 235 140 x 110 105 x 75–80 11
    BH-PATH 200G 200 40 500 plain bore 245 140 x 110 105 x 75–80 11
    B-PATH 200R 200 40 400 roller bearing 235 140 x 110 105 x 75–80 11
    BH-PATH 200R 200 40 500 roller bearing 245 140 x 110 105 x 75–80 11
    B-PATH 200KA 200 40 400 ball bearing (C) 235 140 x 110 105 x 75–80 11
    BH-PATH 200KA 200 40 500 ball bearing (C) 245 140 x 110 105 x 75–80 11

Our New UK Shop is Now Live!

Explore our brand-new online store for the UK!
Exclusive products, hassle-free shopping, and fast delivery.

Shop now!
×